• 전화 (042)862-7500

  • 팩스 (042)862-6500

  • sales@innowill.com

Corrugated Fin Forming

이미지명

Corrugated Fin Forming

이노윌은 2012년 8월 국내 최초로 핀 성형기를 개발하여 운영하고 있습니다. 이 장비는 비교적 가공이 용이한 구리 및 알루미늄 소재만을 가공하는 국내의 기존 성형기와는 달리 스테인리스 스틸과 같은 다양한 고강성 내열 박판 소재를 매우 조밀하게 접을 수 있고, 이에 따라 다양한 형태의 미세한 주름을 갖는 포일로 제작할 수 있습니다.

In August 2012, Innowill developed and operated a pin forming machine for the first time in Korea. Unlike conventional domestic molding machines, which process only relatively easy-to-process copper and aluminum materials, this equipment can very densely fold various high-strength heat-resisting thin sheet materials such as stainless steel, Can be produced as.

이렇게 제작된 미세 채널을 갖는 각종 형상의 핀들은 2차 성형을 거쳐 - 1세제곱 미터당 2000 제곱 미터 이상 - 단위 체적당 매우 큰 전열 면적을 갖는 고효율 컴팩트 Primary Surface Type의 Hi-Prime® 열 교환기 또는 반응기나 기타 열전달 응용 장비의 핵심 부품으로 사용됩니다.

The fins of various shapes having the microchannels thus manufactured are subjected to secondary molding to produce a high-efficiency compact Primary Surface Type Hi-Prime® having a very large heat transfer area per unit volume, more than 2000 square meters per cubic meter, It is used as a core part of application equipment.

이노윌이 공급하는 PSHE는 스테인레스 스틸로 제작되며 저압 영역에서 낮은 압력 손실과 고온의 동작 환경을 요구하는 사용처에 특히 적합합니다. 기존 열교환기로는 사용이 어려웠던 마이크로 가스 터빈(Micro Gas Turbine), 고체 산화물 연료 전지(SOFC, Solid Oxide Fuel Cell), 폐열회수 시스템(Recuperator), 다양한 발전 시스템에 훌륭하게 적용되며 설계에 따라 GTL 반응기나 기화기 등에도 훌륭하게 적용되어 강력한 성능을 발휘합니다.

The PSHE supplied by Innowill is made of stainless steel and is especially suitable for applications requiring low pressure drop and high temperature operating conditions in low pressure areas. It is applied to Micro Gas Turbine, Solid Oxide Fuel Cell (SOFC), Recuperator, and various power generation systems which are difficult to use as conventional heat exchangers. Depending on the design, GTL reactors or carburettors It is also applied to a great performance, and it is powerful.

Type : Plain Crest Fin
Height : 0.020 to 4.000 inch
Fins per inch : 2 to 86
Flow Length : 0.125 to 17.00 inch
Thickness : 0.002 to 0.008 inch

Type : Lanced Fin
Height : 0.036 to 0.750 inch
Fins per inch : 4 to 40
Flow Length : 0.375 to 17.00 inch
Thickness : 0.002 to 0.008 inch

Type : Ruffled Fin
Height : 0.018 to 4.000 inch
Fins per inch : 2 to 65
Flow Length : 0.125 to 17.00 inch
Thickness : 0.002 to 0.008 inch

상단으로 바로가기